An understanding of the requirements and opportunities in maintenance, good safety practices, pride in workmanship, and an understanding of the principles and accepted practices of the maintenance trade are covered in this program. Students are trained to hold positions in factories, hospitals, hotels, etc., where multi-skilled maintenance personnel are needed. Included are courses in air conditioning, carpentry, electricity, machine tool, metal fabrication, and welding.
Progression in the Industrial Maintenance Technology program is contingent upon achievement of a grade of "C" or better in each technical course and maintenance of a 2.0 cumulative grade point average or better (on a 4.0 scale).
Associate in Applied Science Degree
Click here to show/hide Degree requirements.
Click here to print Degree requirements
Degree requirements
Industrial Maintenance Technology, AAS
Required Courses
ENG 101 Writing I 3
MT 115 Technical Mathematics 3 OR
MT 125 Technical Algebra & Trigonometry (3)
Science 3
Heritage/Humanities 3
Social Interaction 3
Oral Communications 3
Subtotal 18 hours
Technical Core:
Required Courses
Computer Literacy 3
BRX 120 Basic Blueprint Reading 3 OR
BRX 110 Basic Blueprint Reading for Machinist (2) OR
BRX 112 Blueprint Reading for Machinist (4) OR
ET 102 Blueprint Reading (2)
FPX 100 Fluid Power 3 AND
FPX 101 Fluid Power Lab 2 OR
ET 265 Applied Fluid Power (3)
IMT 110 Industrial Maintenance Electrical Principles 3 AND
IMT 111 Industrial Maintenance Electrical Principles 2 OR
ENGT 110 Circuits I** (3) AND
ENGT 111 Circuits I Lab 1** (1) AND
ENGT 113 Circuits I Lab 2** (1) AND
ENGT 114 Circuits II ** (3) AND
ENGT 115 Circuits II Lab 1** (1) AND
ENGT 117 Circuits II Lab 2** (1)
IMT 150 Maintaining Industrial Equipment I 3
IMT 151 Maintaining Industrial Equipment I Lab 2
IMT 220 Industrial Maintenance Electrical Motor Controls I 3 AND
IMT 221 Industrial Maintenance Electrical Motor Controls I Lab 2 OR
EET 270 Electrical Motor Controls I (2) AND
EET 271 Electrical Motor Controls I Lab (3) OR
EET 274 Electrical Motor Controls (3) AND
EET 275 Electrical Motor Controls Lab (3) OR
ET 244 Electrical Machinery and Controls (4) OR
IMT 120 Industrial Maintenance Rotating Machinery (3) AND
IMT 121 Industrial Maintenance Rotating Machinery Lab (2) OR
EET 264 Rotating Machinery (2) AND
EET 265 Rotating Machinery Lab (2)
IMT 100 Welding for Maintenance 3 AND
IMT 101 Welding for Maintenance Lab 2 OR
WLD 120 Shielded Metal Arc Welding (SMAW) (3) AND
WLD 121 Shielded Metal Arc Welding (SMAW) Fillet Lab (3) OR
WLD 152 Basic Welding B (5)
Subtotal 27-39 hours
Technical Electives*:
Required Courses
Eighteen (18) credit hours of electives must be taken from the approved list. This list is not all inclusive. Other courses may be taken with approval of the program instructor/advisor. 18
Total Credits 63-75 hours
Technical Electives List*:
Required Courses
ACR 100 Refrigeration Fundamentals 3
ACR 101 Refrigeration Fundamentals Lab 2
ACR 250 Cooling and Dehumidification 3
ACR 251 Cooling and Dehumidification Lab 2
ACR 260 Heating and Humidification 3
ACR 261 Heating and Humidification Lab 2
BRX 210 Mechanical Blueprint Reading for Machinist 2
BRX 230 Mechanical Blueprint Reading 3
CAD 100 Introduction to Computer Aided Design 3
COE 199 Cooperative Education 1-8
CAD 150 Introduction to Programming: CAD 3
EES 225 Programmable Logic Controllers 4
ENGT 110 Circuits I 3
ENGT 111 Circuits I Lab 1 1
ENGT 113 Circuits I Lab 2 1
ENGT 114 Circuits II 3
ENGT 115 Circuits II Lab 1 1
ENGT 117 Circuits II Lab 2 1
EET 148 Electronic Drafting 3
EET 150 Transformers 2
EET 151 Transformers Lab 1
EET 152 Electrical Drafting 2
EET 254 Electrical Construction 3
EET 255 Electrical Construction Lab 4
EET 264 Rotating Machinery 2
EET 265 Rotating Machinery Lab 2
EET 276 Programmable Logic Controllers 2
EET 277 Programmable Logic Controllers Lab 2
ET 106 Mechanical Engineering Graphics II 2
ET 122 Mechanical Power Transmission Systems 3
ET 124 Mechanical Power Transmission Systems Lab 1
ET 243 Electric Power Distribution 3
ET 245 Electrical Machinery 3
ET 250 Programmable Logic Controllers 4
IMT 100 2Welding for Maintenance 3
IMT 101 Welding for Maintenance Lab 2
IMT 115 Basic Machine Tool I 3
IMT 116 Basic Machine Tool I Lab 2
IMT 120 Industrial Maintenance Rotating Machinery 3
IMT 121 Industrial Maintenance Rotating Machinery Lab 2
IMT 130 Industrial Maintenance Electrical Concepts 6
IMT 131 Industrial Maintenance Electrical Concepts Lab 4
IMT 150 Maintaining Industrial Equipment 3
IMT 151 Maintaining Industrial Equipment Lab 2
IMT 198 Practicum 1-8
IMT 199 Cooperative Education 1-8
IMT 220 Industrial Maintenance Electrical Motor Controls I 3
IMT 221 Industrial Maintenance Electrical Motor Controls I Lab 2
IMT 230 Industrial Maintenance of PLCs 5
IMT 231 Industrial Maintenance of PLCs Lab 2
IMT 240 Industrial Maintenance Motor Control Concepts 6
IMT 241 Industrial Maintenance Motor Control Concepts Lab 4
IMT 250 Maintaining Industrial Equipment II 3
IMT 251 Maintaining Industrial Equipment II Lab 3
IMT 280 Advanced Programmable Logic Controllers 3
IMT 281 Advanced Programmable Logic Controllers Lab 2
IMT 290 Special Problems 1
IS 100 Introduction to Industrial Safety 3
ISX 100 Industrial Safety 3
MCX 100 Electrical Motor Controls I 3
MCX 101 Electrical Motor Controls I Lab 2
MCX 110 Electrical Motor Controls II 3
MCX 111 Electrical Motor Controls II Lab 2
MCX 150 Motor Controls 3
MCX 151 Motor Controls Lab 2
MGX 220 Rotating Machinery 3
MGX 221 Rotating Machinery Lab 2
MTT 110 Fundamentals of Machine Tools A 3
MTT 112 Fundamentals of Machine Tools B 4
MTT 114 Fundamentals of Machine Tools 7
MTT 120 Applied Machining I 3
MTT 122 Applied Machining II 4
MTT 124 Applied Machining 7
MTT 224 Advanced Industrial Machining 5
PLB 150 Plumbing, Introduction to the Trade 3
PLB 151 Basic Plumbing Skills 3
PHS 175 Applied Physics 6
PHX 150 Introductory Physics 3
PMX 100 Precision Measurement 3
WLD 123 Shielded Metal Arc Welding Groove Welds with Backing Lab 3
WLD 100 Oxy-Fuel Systems 2
WLD 101 Oxy-Fuel Systems Lab 2
WLD 120 Shielded Metal Arc Welding (SMAW) 2
WLD 121 Shielded Metal Arc Welding Fillet Lab 3
WLD 151 Basic Welding A 2
WLD 152 Basic Welding B 5
ITS 211 Manufacturing Processes 3
MST 200 Advanced Hydraulic Systems 3
MST 201 Advanced Hydraulic Systems Lab 2
MST 204 Advanced Pneumatic Systems 3
MST 205 Advanced Pneumatic Systems Lab 2
**If courses equaling 10 credits are taken, five (5) credits may be used as electives.
Diploma
Click here to show/hide Diploma requirements.
Click here to print Diploma requirements
Diploma requirements
INDUSTRIAL MAINTENANCE TECHNICIAN
REQUIRED COURSES
MT 115 Technical Mathematics 3 OR
MT 125 Technical Algebra & Trigonometry (3)
Three (3) credits from the AAS IMT general education requirements 3
Subtotal 6 hours
Technical Core:
REQUIRED COURSES
Computer Literacy 3
BRX 120 Basic Blueprint Reading 3 OR
BRX 110 Basic Blueprint Reading for Machinist (2) OR
BRX 112 Blueprint Reading for Machinist (4) OR
ET 102 Blueprint Reading (2)
FPX 100 Fluid Power 3 AND
FPX 101 Fluid Power Lab 2 OR
ET 265 Applied Fluid Power (3)
IMT 110 Industrial Maintenance Electrical Principles 3 AND
IMT 111 Industrial Maintenance Electrical Principles 2 OR
ENGT 110 Circuits I** (3) AND
ENGT 111 Circuits I Lab 1** (1) AND
ENGT 113 Circuits I Lab 2** (1) AND
ENGT 114 Circuits II ** (3) AND
ENGT 115 Circuits II Lab 1** (1) AND
ENGT 117 Circuits II Lab 2** (1)
IMT 150 Maintaining Industrial Equipment I 3
IMT 151 Maintaining Industrial Equipment I Lab 2
IMT 220 Industrial Maintenance Electrical Motor Controls I 3 AND
IMT 221 Industrial Maintenance Electrical Motor Controls I Lab 2 OR
EET 270 Electrical Motor Controls I (2) AND
EET 271 Electrical Motor Controls I Lab (3) OR
EET 274 Electrical Motor Controls (3) AND
EET 275 Electrical Motor Controls Lab (3) OR
ET 244 Electrical Machinery and Controls (4) OR
IMT 120 Industrial Maintenance Rotating Machinery (3) AND
IMT 121 Industrial Maintenance Rotating Machinery Lab (2) OR
EET 264 Rotating Machinery (2) AND
EET 265 Rotating Machinery Lab (2)
IMT 100 Welding for Maintenance 3 AND
IMT 101 Welding for Maintenance Lab 2 OR
WLD 120 Shielded Metal Arc Welding (SMAW) (3) AND
WLD 121 Shielded Metal Arc Welding (SMAW) Fillet Lab (3) OR
WLD 152 Basic Welding B (5)
Subtotal 27-39 hours
Technical Electives*:
REQUIRED COURSES
Fifteen (15) credit hours of electives must be taken from the approved list. This list is not all inclusive. Other courses may be taken with approval of the program instructor/advisor.
Total Credits: 48-60 hours
Certificates
Click here to show/hide Certificate requirements.
Click here to print Certificate requirements
Certificate requirements
INDUSTRIAL MAINTENANCE MACHINISTS MECHANIC
REQUIRED COURSES
BRX 120 Basic Blueprint Reading 3
IMT 100 Welding for Maintenance 3 AND
IMT 101 Welding for Maintenance Lab 2 OR
WLD 120 Shielded Metal Arc Welding (3) AND
WLD 121 Shielded Metal Arc Welding Fillet Lab (3) OR
WLD 152 Basic Welding B (5)
MTT 114 Fundamentals of Machine Tool 7 OR
MTT 110 Fundamentals of Machine Tool A (3) AND
MTT 112 Fundamentals of Machine Tool B (4)
IMT 150 Maintaining Industrial Equipment 3
IMT 151 Maintaining Industrial Equipment Lab 2
Total Credits 20-21 hours
INDUSTRIAL MAINTENANCE ELECTRICAL MECHANIC
REQUIRED COURSES
FPX 100 Fluid Power 3 AND
FPX 101 Fluid Power Lab 2 OR
ET 265 Applied Fluid Power (2)
IMT 110 Industrial Maintenance Electrical Principles 3 AND
IMT 111 Industrial Maintenance Electrical Principles 2 OR
ENGT 110 Circuits I** (3) AND
ENGT 111 Circuits I Lab 1** (1) AND
ENGT 113 Circuits I Lab 2** (1) AND
ENGT 114 Circuits II ** (3) AND
ENGT 115 Circuits II Lab 1** (1) AND
ENGT 117 Circuits II Lab 2** (1)
IMT 220 Industrial Maintenance Electrical Motor Controls I 3 AND
IMT 221 Industrial Maintenance Electrical Motor Controls I Lab 2 OR
EET 270 Electrical Motor Controls I (2) AND
EET 271 Electrical Motor Controls I Lab (2) OR
ET 244 Electrical Machinery and Controls (4) OR
IMT 120 Industrial Maintenance Rotating Machinery (3) AND
IMT 121 Industrial Maintenance Rotating Machinery Lab (2) OR
EET 264 Rotating Machinery (2) AND
EET 265 Rotating Machinery Lab (2) OR
IMT 280 Advanced Programmable Logic Controllers (3) AND
IMT 281 Advanced Programmable Logic Controllers (2) OR
EET 276 Programmable Logic Controllers (2) AND
EET 277 Programmable Logic Controllers Lab (2)
Total Credits 11-20 hours
INDUSTRIAL MAINTENANCE MECHANIC LEVEL I
REQUIRED COURSES
FPX 100 Fluid Power 3 AND
FPX 101 Fluid Power Lab 2 OR
ET 265 Applied Fluid Power (2)
IMT 110 Industrial Maintenance Electrical Principles 3 AND
IMT 111 Industrial Maintenance Electrical Principles 2 OR
ENGT 110 Circuits I** (3) AND
ENGT 111 Circuits I Lab 1** (1) AND
ENGT 113 Circuits I Lab 2** (1) AND
ENGT 114 Circuits II ** (3) AND
ENGT 115 Circuits II Lab 1** (1) AND
ENGT 117 Circuits II Lab 2** (1)
IMT 150 Maintaining Industrial Equipment 3
IMT 151 Maintaining Industrial Equipment Lab 2
Total Credits 12-20 hours
INDUSTRIAL MAINTENANCE MECHANIC LEVEL II
REQUIRED COURSES
BRX 120 Basic Blueprint Reading 3 OR
ET 102 Blueprint Reading (2)
FPX 100 Fluid Power 3 AND
FPX 101 Fluid Power Lab 2 OR
ET 265 Applied Fluid Power (2)
IMT 110 Industrial Maintenance Electrical Principles 3 AND
IMT 111 Industrial Maintenance Electrical Principles 2 OR
ENGT 110 Circuits I** (3) AND
ENGT 111 Circuits I Lab 1** (1) AND
ENGT 113 Circuits I Lab 2** (1) AND
ENGT 114 Circuits II ** (3) AND
ENGT 115 Circuits II Lab 1** (1) AND
ENGT 117 Circuits II Lab 2** (1)
IMT 100 Welding for Maintenance 3 AND
IMT 101 Welding for Maintenance Lab 2 OR
WLD 120 Shielded Metal Arc Welding (3) AND
WLD 121 Shielded Metal Arc Welding Fillet Lab (3) OR
WLD 152 Basic Welding B (5)
MTT 114 Fundamentals of Machine Tool 7 OR
MTT 110 Fundamentals of Machine Tool A (3) AND
MTT 112 Fundamentals of Machine Tool B (4)
Total Credits 21-31 hours
ELECTRO-HYDRAULIC TECHNICIAN
REQUIRED COURSES
IMT 110 Industrial Maintenance Electrical Principles 3 AND
IMT 111 Industrial Maintenance Electrical Principles Lab 2 OR
ENGT 110 Circuits I (3) AND
ENGT 111 Circuits I Lab 1 (1) AND
ENGT 113 Circuits I Lab 2 (1)
FPX 100 Fluid Power 3
FPX 101 Fluid Power Lab 2
MST 206 Electro-hydraulic 3
MST 207 Electro-hydraulic Lab 2
Total Credits 15 hours
Look up the median annual base salary In Northern Kentucky for occupations related to this program at www.Salary.com
Curriculum in the KCTCS system is constantly being reviewed, improved and updated to ensure quality and relevance. Exact course requirements will be provided by a program advisor at an advising session or upon enrollment. Courses listed in this document are representative, but not binding on Gateway Community and Technical College.
